Is RO the right technology for every water source?
No. Suitability depends on water analysis, the required output and the operating and reject-water considerations.
Industrial RO
RO systems engineered for the water you have
Reverse osmosis can reduce dissolved constituents for industrial applications. Source-water quality, pretreatment, recovery, membranes and operating practice all matter.
The membrane is only one part of a reliable RO plant
Hitech Fluid Systems designs RO plants for industrial and utility requirements using spiral-wound thin-film composite polyamide membranes selected for fouling resistance and energy performance. Systems follow membrane-manufacturer guidelines and can include automation for flushing, logging and supervised access.
Before selecting an RO plant, establish what the treated water will be used for, how much is needed, the acceptable output quality and how the system will be operated. Water analysis determines pretreatment and the likely operating approach.
What Hitech Fluid Systems can support
- New RO system assessment and process design
- Pretreatment such as UF, filtration and softening
- Installation, testing and commissioning
- Existing system troubleshooting and improvement
- Preventive maintenance and agreed AMC support
- Integration into a wider WTP or recycling train
When an existing RO plant needs attention
Reduced output, changing permeate quality, high pressure, frequent cleaning or operating-cost changes can each have several causes.
- Feed-water quality has changed
- Pretreatment is overloaded or bypassed
- Membranes are fouled or aged
- Recovery is set too aggressively
- Instruments or flushing logic are unreliable
- Reject handling is constraining operation
Frequently asked questions
What information should I send for an RO proposal?
Share the source-water analysis, required treated-water quality, demand, operating hours, location and any existing system details.
Can Hitech Fluid Systems assess a system supplied by someone else?
Yes. Hitech Fluid Systems can review existing RO systems and recommend appropriate corrective or upgrade work.
Discuss your RO requirement
Tell us about source water, output quality and whether this is a new system or an existing plant.